NBMC Member Directory

Manufacture and Sales of High Purity Chemical Liquid Valves

Murata Manufacturing Co., Ltd. is a worldwide leader in the design, manufacture and sale of ceramic-based passive electronic components & solutions, communication modules, power supply modules and sensors. Murata is committed to the development of advanced electronic materials and leading edge, multi-functional, high-density modules. The company has employees and manufacturing facilities throughout the world. For more information, please visit www.murata.com or for the MEMS sensors www.muratamems.fi.

NTI Nanofilm is a deep-tech leader in advanced materials and nanotechnology solutions. With over 25 years of expertise, we provide integrated solutions across thin-film coatings, nanofabrication, and vacuum coating equipment. Our proprietary FCVA-based coatings, TAC-ON®, F-TAC, MiCC®, and ASD, address critical semiconductor challenges including high-temp endurance, ESD control, yield protection, and contamination mitigation. We also serve industries such as consumer electronics, optics, automotive, and renewable energy and more. Headquartered in Singapore, we operate across China, India, Japan, Southeast Asia, and Europe and with over 4,000 employees. Our in-house R&D and NTI-NTU Corporate Lab transform research into scalable, industry-ready innovations.

Formed in 2015 through a cooperative agreement between the US Department of Defense (DoD) and FlexTech Alliance, NextFlex is a consortium of companies, academic institutions, non-profits and state, local and federal governments with a shared goal of advancing U.S. Manufacturing of FHE. By adding electronics to new and unique materials that are part of our everyday lives in conjunction with the power of silicon ICs to create conformable and stretchable smart products, FHE is ushering in an era of “electronics on everything” and advancing the efficiency of our world.

Nidec Advance Technology Corporation has dedicated to deliver electrical inspection systems for PWB and Semiconductor package industry. Applying the established technologies, Nidec Advance technology also develops semiconductor inspection systems. Our primary products, RWi series are Semiconductor Wafer Bump 2D/3D Inspection System which is realized fully integrated simultaneous 2D/3D & High-Speed Scanning to measure Gold, Solder μ and Cu Pillar Bumps. MEMS spring probe manufacturing line will also become a good solution for Probe Card Application. Recently, we relased the inspection system solution for power devices such as IGBT and SiC. Please feel free to contact and find our solutions.

National metrology institute

Northrop Grumman solves the toughest problems in space, aeronautics, defense, and cyberspace to meet the ever-evolving needs of our customers worldwide. Our 90,000 employees define possible every day by using science, technology, and engineering to create and deliver advanced systems, products, and services. NG has two wafer fabs (MD & CA) along with post-processing capabilities (MD, FL & CA) servicing the US Government’s Microelectronics needs.

Since 1989, NOVA has been a leading provider of wafers and processing services in the industry. We are a Texas HUB certified, ITAR registered, woman owned small business working as a one-stop shop for our customers, offering a variety of products such as Silicon, Glass, Epi, SOI, II-VI, and III-V materials, as well as Sapphire, SiC and Quartz, ranging from 1” to 12” in diameter. By keeping informed on research, rapid product development and advanced production methods, NOVA can offer a variety of technical solutions in this diverse market. Some of our services include thermal processing to satisfy MOS/MEMS and Graphene process requirements, such as Dry Chlorinated Thermal Oxide with Forming Gas Anneal, Wet Thermal Oxide and Dry Thermal Oxide, Silicon Nitrides and Metals. We also offer SOI wafers with etch cavities for Wafer Level Packaging (WLP), Biomedical, 2D/3D materials and other applications.

Object Tech, Inc. aims to Accelerate Deeptech R&D with AI Automation. We build domain-specific AI software tools and Agentic AI systems that streamline complex engineering, prototyping and manufacturing workflows.

Oxford Instruments designs, supplies, and supports high-technology tools and systems with a focus on research and industrial applications. Innovation has been the driving force behind Oxford Instruments' growth and success for 60 years, supporting its core purpose to address some of the world’s most pressing challenges.  Oxford Instruments Plasma Technology offers flexible, configurable process tools and leading-edge processes for the precise, controllable, and repeatable engineering of micro / nano-structures and material layers. Our systems provide process solutions for the etching of nanometre sized features, nanolayer deposition, and the controlled growth of nanostructures. These solutions are based on core technologies in plasma-enhanced deposition and etch, ion beam deposition and etch, atomic layer deposition (ALD), deep silicon etch, and chemical vapour deposition. Products range from compact stand-alone systems for R&D, through batch tools and up to clustered cassette-to-cassette platforms for high-throughput production processing.

Parker Hannifin manufactures a complete line of Ultra High Purity fittings, diaphragm and bellows valves, bulk gas valve components, high purity cylinder connections, regulators, TEFLON® fittings, valves and tubing, Instrument quick couplers, stainless steel filters, ceramic filter elements, membrane filter cartridges, capsules and electropolished filter housings, pneumatic and liquid valves, digital and proportional valves, pressure switches, electric and pneumatic cylinders, vacuum and pneumatic logic products, air preparation units and multiple-axis positioning tables, bridge and gantry systems, high speed belt driven positioners, clean room and vacuum prepared tables, miniature positioners, operator interface hardware and software machine control systems.

PDF Solutions, Inc. (NASDAQ: PDFS) is the leading provider of yield improvement technologies and services for the IC manufacturing process life cycle. PDF Solutions offers solutions that are designed to enable clients to lower costs of IC design and manufacture, enhance time to market, and improve profitability by addressing design and manufacturing interactions from product design to initial process ramps to mature manufacturing operations. PDF Solutions’ Characterization Vehicle® (CV®) electrical test chip infrastructure provides the core modeling capabilities, and is used by more leading manufacturers than any other test chips in the industry. Proprietary Template™ layout patterns provide optimum area, performance, and manufacturability for designing IC products. Exensio-Yield provides world-class variability control in manufacturing by leveraging PDF Solutions’ industry-leading yield management technology and fault detection and classification (FDC) with Exensio-Control software. Exensio-Test leverages integration and analysis technology that produces diagnostic and predictive information that can be used to further optimize semiconductor yields.　 Headquartered in San Jose, Calif., PDF Solutions operates worldwide with additional offices in Canada, China, France, Germany, Ita(more...)

Plasma-Therm® is a leading provider of advanced plasma processing equipment. Plasma-Therm systems perform critical process steps in the fabrication of integrated circuits, micro-mechanical devices, solar power cells, lighting, and components of products from computers and home electronics to military systems and satellites. Specifically, Plasma-Therm systems employ innovative technology to etch and deposit thin films. The company's Mask Etcher® series for photomask production has exceeded technology roadmap milestones for more than 15 years. Its new MicroDieSingulator™ systems bring the precision and speed of plasma dicing to chip-packaging applications. Manufacturers, academic and governmental institutions depend on Plasma-Therm equipment, designed with “lab-to-fab” flexibility to meet the requirements of both R&D and volume production. Plasma-Therm's products have been adopted globally and have earned their reputation for value, reliability, and world-class support. Plasma-Therm’s status as a preferred supplier of plasma process equipment has been recognized with 16 consecutive VLSIresearch industry awards, including #1 rankings for customer satisfaction in the last two years.

Polyteknik AS - WHEN THIN FILM MATTERS Polyteknik AS is a PVD equipment manufacturer with an innovative and best service approach. With more than twenty years in business, a global reference list, and an excellent platform of technology, Polyteknik AS has turned to be an appreciated partner in the thin film industry. PVD Systems The portfolio of platform systems range from small scale R&D to high volume or large area deposition systems - covered by the FLEXTURA and INFINITY VB platforms. Polyteknik AS cover several deposition processes including sputtering, evaporation, and varieties of these. At Polyteknik AS you will meet a dedicated team interested in a strong cooperation towards the best solution. We offer both standard systems and joint customer developed systems for specific purposes. Our reliable PVD systems are featuring: Modular standard systems Modular process packages Modular investment platforms Contract Coating Polyteknik AS has various industrial coating equipment installed for daily subcontract coating (Coating Service). The Coating Service division has more than 10 different variations of PVD systems in-house. This enable us to do proof of concept on wafer, 3D objects or even roll-to-roll, which can be essential for non-standard coatings. They d(more...)

Promex specializes in design, packaging, and assembly services for heterogeneous integration of key subsystems used in diagnostic, life science, medical, optical, photonics and MEMS devices. The company is skilled at handling tiny components that require unique functionalities with complex, custom, or detailed assembly requirements. Founded in 1975, Silicon Valley-based Promex provides design-for-manufacturing services coupled with materials science expertise and broad assembly capabilities for small- to mid-volume onshore production. Services include RoHS-optimized SMT, wafer thinning, dicing, wire bonding, flip chip, and combining microelectronic and non-microelectronic components, provided in the company's Class 100/Class 1000 cleanrooms. Promex holds a CA FDB license and is ISO 13485:2016 and ISO 9001:2015 certified, IPC certified and ITAR registered. https://promex-ind.com/

Purdue University launched a major semiconductor initiative in 2022, building on decades of inspirational education, innovative research, strong corporate partnerships, and our culture of addressing key challenges for our state, the nation and the world. With academic, corporate and government partners, Purdue is addressing the nation's need for semiconductor talent and innovation with excellence at scale.