downloadGroupGroupnoun_press release_995423_000000 copyGroupnoun_Feed_96767_000000Group 19noun_pictures_1817522_000000Member company iconResource item iconStore item iconGroup 19Group 19noun_Photo_2085192_000000 Copynoun_presentation_2096081_000000Group 19Group Copy 7noun_webinar_692730_000000Path
Skip to main content
Default Banner Image

SEMI News

SEMI Korea is back on track. New confirmed COVID-19 cases in Korea now average about 50 per day – with more than half from abroad – after peaking in early March, setting the stage for the Seoul office’s first on-site program since the global coronavirus outbreak began.For four days in late July, SEMI Korea held the Semiconductor Process Technology Tutorial (SPT Tutorial) at COEX, home to SEMICON Korea. Nearly 180 university students and chip engineers gathered for two semiconductor manufacturing courses (beginner and intermediate) taught by professors from schools including Hongik and Sungkyunkwan Universities and senior engineers from major semiconductor makers. The beginner’s course covered the end-to-end chipmaking process and the intermediate class examined key phases of semiconductor manufacturing including silicon wafer preparation, cleaning and CMP, lithography, etch, metrology and inspection, implantation and diffusion, deposition and packaging.Social distancing, now part of daily life in Korea, and other protective measures implemented by SEMI Korea to ensure the safety and well-being of the attendees and lecturers made the event possible. SEMI Korea followed best COVID-19 practices including the following.Step 1. Site check of COVID-19 prevention systemCOEX is amply equipped with sanitizers and thermal imaging cameras, with medical staff available in case of an emergency. COEX also constantly monitors air quality at the entire facility while keeping it well-ventilated. Step 2. Screening of registrants Online medical questionnaire review: After attendees completed a SEMI Korea medical questionnaire and submitted it prior to registration, SEMI Korea checked the health status of each attendee and whether they had recently traveled overseas to a high-risk COVID-19 region. Registrant identification: Upon each registrant’s arrival at COEX, SEMI Korea confirmed that the identification of each attendees matched the registrant who completed the questionnaire. Temperature measurement and sanitizer use: SEMI Korea required all attendees to apply hand sanitizer before entering the classroom and measured the body temperature of each. Anyone running a temperature would have been denied entry. Mask Wearing: All attendees were required to wear mask socially distance during check-in and the lectures. Attendees line up for registration while social distancing. Step 3. Badge Distribution and Classroom Entry: Once attendees had passed through all the safety protocols, they were given badges and admitted to the lecture room. Each classroom table was equipped with acrylic desktop social distancing shields to contain the respiratory aerosols of the students. In addition, only one-way passage was allowed through entrances and exits to minimize contact among participants. Acrylic desktop shields helped with social distancing. "Thanks to SEMI's thorough COVID-19 prevention plan for COVID-19, both the speakers and attendees participated in the tutorial confident that the environment was safe,” said speaker Professor Taesung Kim of Sungkyunkwan University. “I look forward to seeing SEMI continue to take these precautions to help the semiconductor industry remain connected and grow.”SEMI Korea moves forward with nine on-site events in 2020Webinars will continue to serve as important forums for SEMI Korea to help members connect, collaborate and innovate while preventing the spread of COVID-19. But to help the industry grow and prosper, SEMI Korea’s on-site events – which have always and will continue to make safety the top priority – will remain robust.In 2020, SEMI Korea will host nine on-site events including the MEMS Sensor Forum and SMC Korea. We appreciate the industry’s support and cooperation as the world continues to battle COVID-19 and look forward to connecting with members in webinars and at on-site events again soon!Jaegwan Shim is a marketing specialist at SEMI Korea.
Read More

ESD Alliance to Lead Joint Effort with Cadence, Mentor, a Siemens Business, and Synopsys to Create Server Certification Protocol

MILPITAS, CALIF. –– August 4, 2020 –– SEMI, Cadence, Mentor, a Siemens Business, and Synopsys today announced plans to jointly develop an industry-standard protocol to combat electronic design automation (EDA) software piracy, a growing and costly problem for software vendors and their users. Under the partnership, the organizations will develop the SEMI Server Certification Protocol, a standard that will provide strong protection against piracy by defining how servers can be uniquely identified.

semi logo

Currently, most software license management systems rely on a license manager that runs on a server typically earmarked by a machine identifier. The problem is that software pirates can clone the machine identifier using virtualization technologies to gain illegitimate access to additional licenses without added cost.

“This joint development effort highlights SEMI’s ability to gather industry players to solve critical problems,” said Bob Smith, the ESD Alliance’s executive director. “We look forward to working with EDA industry leaders Cadence, Mentor and Synopsys to develop this much-needed protocol that will provide protection against piracy.”

“Software piracy is a growing challenge and threatens to stifle innovation for EDA companies and customers alike,” said Nimish Modi, senior vice president of market and business development at Cadence. “We are glad to collaborate with the industry on defining this new standard to help further the efforts towards a comprehensive anti-piracy strategy.”

“New technologies and solutions have enabled other segments of the software industry to combat piracy,” said Arun Venkatachar, vice president of Synopsys central engineering. “It is time for EDA to be on par with the rest of the industry. This collaborative effort from both vendors and customers is critical for an effective anti-piracy strategy.”

“Software piracy ultimately hurts our honest customers because it provides pirates with an unfair competitive advantage,” said Joe Sawicki, executive vice president, IC EDA for Mentor, a Siemens Business. “Theft also raises the price of products sold to legitimate users. Together with our industry peers, Mentor will work to establish a new anti-piracy standard that protects against theft and provides a level playing field for all.”

The License Management/Anti-Piracy (LMA) Committee within the Electronic System Design Alliance (ESD Alliance) will manage the partnership. Cadence, Mentor and Synopsys are members of the LMA Committee. The ESD Alliance is a SEMI Technology Community representing members in the electronic system and semiconductor design ecosystem.

The LMA Committee works with the Centralized Enterprise Licensing User Group (CELUG), a community within HPC Pros comprised of IT professionals and users of system design automation software to address common software licensing issues.

“HPC Pros’ CELUG is pleased to support the ESD Alliance’s continuing efforts to provide a secure license infrastructure,” said Derek Magill, executive director of HPC Pros. “The LMA Committee has worked closely with CELUG to ensure that the certification process will be compatible with the diverse environments of tool customers. Deployment of this capability will increase our confidence that all licenses used are fairly acquired, making it harder for unethical competitors to gain competitive advantage through the theft of licenses.”

About SEMI

SEMI® connects more than 2,400 member companies and 1.3 million professionals worldwide to advance the technology and business of electronics design and manufacturing. SEMI members are responsible for the innovations in materials, design, equipment, software, devices, and services that enable smarter, faster, more powerful, and more affordable electronic products. Electronic System Design Alliance (ESD Alliance), FlexTech, the Fab Owners Alliance (FOA) and the MEMS & Sensors Industry Group (MSIG) are SEMI Strategic Technology Communities, defined communities within SEMI focused on specific technologies. Visit www.semi.org to learn more, contact one of our worldwide offices, and connect with SEMI on LinkedIn and Twitter.

About the Electronic System Design Alliance

The Electronic System Design (ESD) Alliance, a SEMI Technology Community representing members in the electronic system and semiconductor design ecosystem, is a community that addresses technical, marketing, economic and legislative issues affecting the entire industry. It acts as the central voice to communicate and promote the value of the semiconductor design ecosystem as a vital component of the global electronics industry.

All trademarks and registered trademarks are the property of their respective owners.

Note: A list of relevant Siemens trademarks can be found here.

Association Contacts

Michael Hall/SEMI
Phone: 1.408.943.7988
Email: [email protected]

Nanette Collins/ESD Alliance
Phone: 1.617.437.1822
Email: [email protected]

At SEMICON West 2020, the Honorable Al Gore, former U.S. Vice President and recipient of the Nobel Peace Prize for environmental activism, commented on the world being in the midst of a “sustainability revolution.” Just what did he mean by that, and why bring that message to us? The answer is that he believes the digital transformation wields the magnitude of the agricultural and industrial revolutions, but with the exponential speed that the semiconductor industry created and enabled. Ok, that would put him in the right place… SEMICON West.Among a rich lineup of speakers to mark the 50th anniversary of the event – and 50 years of the semiconductor industry facilitating the innovation of the Information Age -- Gore joined other icons in their fields who graced the virtual stage for our featured keynotes. Each analyzed how microchip advances are critical to solving some of the world’s greatest challenges.As host of the conference, I had the privilege of introducing Gore; Gary Dickerson, President and CEO of Applied Materials; and, Dr. John Kelly III, Executive Vice President and Director of IBM Research, along with other renowned speakers. Their insights seemed especially timely for how our global supply chain can help to build a more sustainable future. Following are a few of the highlights from their discussions. Al Gore – The Planet Faces Existential CrisisIn his keynote conversation with Greenbiz editorial director Heather Clancy kicking off SEMICON West 2020, Gore emphasized that digital technology advances – and in particular microchip innovation – provide the greatest opportunities to overcome the world’s most epic challenges. Chip breakthroughs will be the cutting edge of what he called the rapidly growing sustainability revolution to improve energy efficiency, reduce our reliance on fossil fuels, and optimize the performance of renewable energy generated by solar, wind, and electric battery sources.“We face an inflection point as we rely more on data and communications technology, particularly in areas like cloud computing and artificial intelligence,” Gore said. “Industry is aware of this and working on it, but this meeting (SEMICON West 2020) with your present leadership marks a real turning point. It’s something to be proud of, something to be celebrated. It’s what gives me hope.”Citing Moore’s Law and enormous strides made in chip efficiency and effectiveness, Gore said that within two years smart chips will make everything from solar panels and batteries to renewable energy plants and electric vehicles to be both cost- and performance-competitive with traditional energy sources. Afterwards, renewable energy will be more attractive. Gore urged the energy-intensive semiconductor industry to shift to more renewable power sources for manufacturing. To meet this challenge, Gore encouraged the industry to embrace strategies for “step changes”: First, collaborate and share best practices more transparently across the entire microelectronics value chain. Examples already abound where “cutting-edge apps, AI, and deep learning reduced data server energy use significantly without hardware changes,” he said. Second, reduce electricity required to manufacture smarter and smaller semiconductors. Gore encouraged “all of the equipment manufacturers to work together to reduce the amount of carbon dioxide emissions in manufacturing these advanced semiconductors.” Third, follow the lead of a growing number of companies that “continue decarbonizing the power supply on which data centers operate,” he said. Fourth, work with government through the Science Based Target Initiative, which sets decarbonization limits that keep global temperatures no more than two degrees Celsius above preindustrial levels. Finally, rely on “diversity of thought” and “collective thinking” when innovating for the digital future. Research and experience prove that different points of view lead to better decisions. The technology industry has made progress in workforce diversity, but more can be done, Gore said. This last point plays to our collaborative strengths as SEMI members and an industry. “It is just unbearable to imagine a future generation living with the kinds of consequences scientists tell us would ensue if we don’t heed their warnings and solve this crisis,” Gore said, drawing parallels to the COVID-19 pandemic. “We have to accept the situation and make sure we do everything we can. I am inspired by this industry’s leadership, innovation, and spirit to rise to the challenge and make a difference.”Gary Dickerson – Making Possible A Better FutureTo ensure another 50 years of accelerating growth and innovation, today’s semiconductor leaders must share a deep commitment to a more sustainable and just supply chain industrywide.“The first thing we need to do is decouple our growth from environmental impacts,” Dickerson said in his keynote. “Our responsibility as leaders is to leave the world a better place.”Dickerson said that while he firmly believes the explosion of processing and storage data has “the potential to change the world,” the downside is that it also has the potential to rapidly expand our industry’s carbon footprint. Without dramatic change, electrical usage will continue to rise as machines generate and consume more data, compute performance progresses, and workloads from the edge to the cloud grow.“It will be impossible to create neural networks (using AI) with the rate of today’s power consumption,” Dickerson said, noting that more improvements must be made in the performance and efficiency of semiconductor devices, architectures, structures, materials, and advanced packaging.Dickerson urged the electronics ecosystem to “permanently think and act differently” by breaking down communication barriers among systems integrators, equipment suppliers, design and manufacturing service providers, and other industry players. Sharing learnings and best practices will be vital to this change, he said. Dickerson unveiled SuCCESS2030 (Supply Chain Certification for Environmental and Social Sustainability) – Applied Materials’ 10-year roadmap for creating a more sustainable supply chain – during his talk. Under the SuCCESS2030 initiative, Applied Materials will hold its suppliers to the company’s own high standards for committing to renewable energy and workforce diversity by setting targets such as: Reducing supply chain carbon emissions 15 percent in four years by relying more on intermodal shipping than air freight Transitioning the supply chain to recycled content packaging, with a target of 80 percent by the end of 2023 Eliminating phosphate-based, pre-treatment of metal surfaces by 2024 Working with trade associations like SEMI to develop diversity and inclusion strategies to increase underrepresented minorities in the workplace Dickerson said that deeper and more open partnerships between Applied Materials and its customers and suppliers have led to a number of promising outcomes. Examples include hardware and software upgrades, product and service optimizations, and improvements in chip architectures that increased throughput density for higher system performance while decreasing power and chemical consumption, costs, and space requirements. What’s more, Applied Materials recently introduced its Selective Tungsten Process Technology, which uses new materials, atomic-level designs, and ultra-clean rooms to improve the performance of interconnected transistors while lowering power consumption.Dickerson said the COVID-19 pandemic has awakened the world to the power of digital technologies that make it possible to communicate, collaborate, and share data across the globe while sheltering in place. “When I think of the world’s grand challenges, it’s clear the semiconductor industry has a critical role to play,” Dickerson said. “I strongly believe we’re in a position to shape the future and leave the world a better place.”John E. Kelly III – 50 Years That Changed The World … And We’re Just Getting Started During the past half century, semiconductors have given rise to essentially every major technology advance, Kelly said in his keynote. Microchip innovation has played a central role in rocketing humans to the moon, simulating nuclear weapons on a supercomputer, connecting people to nearly everything via mobile devices, and keeping people alive with pacemakers and other electronic medical devices.The strides in innovation have been staggering. In 1970, a semiconductor chip featured a few thousand components. Today, that number stands at 50 billion. Breakthroughs in everything from materials and chemicals to polishing, processes and interconnectivity have driven gains in power-efficiency and performance while reducing chip size.Moore’s Law is far from dead. Paraphrasing Winston Churchill, Kelly said, semiconductor innovation today is not at “the beginning of the end, but at the end of the beginning, and the best is yet to come – driven by extreme collaboration and extreme innovation to solve the world’s biggest challenges.”Kelly said he believes technology is the only answer to the onslaught of grand challenges confronting societies and people today, including air and water pollution, climate change, diminishing natural resources, storm-related disasters, food supply shortages, and the COVID-19 pandemic.Kelly lamented that the world’s response to COVID-19 illustrates that “not much has changed” since the Spanish Flu crisis a century ago. The same technology – masks – remains the primary defense. “I think if we had used digital technologies and computer modeling earlier on, we could have detected the spread of this flu” to minimize its impact, Kelly said.Today’s computer modeling and analytics capabilities aren’t quite ready yet to tackle such complex problems as pandemics, global warming, or water contamination. However, Kelly said, several game-changing technologies – all powered by semiconductors – are emerging as promising answers to our most daunting challenges.“It’s all about the data, and artificial intelligence is the way forward – it’s analytics on steroids, and many new devices will be required to drive AI at the scale of these problems,” Kelly said. “The second technology revolves around not just cloud computing but edge computing and cloud at the edge. Data will be generated in enormous amounts at the edge, which is where we will need to store and compute the data. The next is Quantum Computing. Frankly, we do not have enough computing power yet to look at some of the biggest challenges we have.”All these advances will present new challenges for the semiconductor industry, such as developing new materials, new chip architectures and new mapping structures for AI-embedded devices to reach their full potential.With many of these disruptive innovations too large for any company to solve singlehandedly, Kelly advised industry players to form more “radical partnerships.”“Extreme collaboration and extreme innovation will drive solutions to all these world challenges,” Kelly said. “The best is yet to come.”Radical partnerships… Sustainable revolutions… Extreme innovation… It’s been 50 years of SEMICON West, but it sounds like we’re just getting the real magic started. Like John Kelly said and the other keynoters emphasized, the best is yet to come.Dave Anderson is president of SEMI Americas.
Read More

MILPITAS, Calif. — July 28, 2020 —  The global semiconductor packaging materials market will track chip industry growth to expand from $17.6 billion in revenue logged in 2019 to $20.8 billion in 2024, a 3.4 percent Compound Annual Growth Rate (CAGR), SEMI and TechSearch International forecast in the Global Semiconductor Packaging Materials Outlook released today. A number of semiconductor industry growth drivers will power the surge including big data, high-performance computing (HPC), artificial intelligence (AI), edge computing, advanced memory, the 5G infrastructure build-out, 5G smartphone adoption, growth of electric vehicle adoption and enhanced safety features for automobiles.

SEMI TechSearch Logo

Packaging materials are key to the growth of these applications, enabling advanced packaging technologies that undergird the higher performance, reliability and integration of next-generation chips.

Laminate substrates, the largest materials segment, will see a CAGR of over 5 percent, driven by demand for system-in-package (SIP) and high-performance devices. Wafer-level packaging (WLP) dielectric will register the highest growth with a 9 percent CAGR over the forecast period. The trend towards smaller, thinner packaging will dampen growth of leadframes, die attach, and encapsulant materials, though new technologies are being developed to enhance performance.

With the steady advance of semiconductor packaging technology innovation, the next several years are expected to present several areas of opportunity in the materials market including:

  • New substrate designs to support narrow bump pitch with higher density
  • Low Dk and Df laminate materials for 5G mmWave applications
  • Coreless structure based on a modified leadframe technology called Molded Interconnect Solution/System (MIS)
  • Mold compounds to provide underfill for copper pillar flip chip
  • Smaller fillers and narrower particle size distribution needed in resin materials to address narrow gaps and fine pitch flip chip
  • Die attach materials with no-to-low resin bleed, no-to-low outgassing, and processed within <5 µm placement
  • Dielectrics with lower dielectric loss (Df) required for higher frequency applications such as 5G
  • Void-free deposition and low-overburden deposition required for TSV plating

Other growth areas highlighted in the report’s forecast period from 2019 to 2024 include:

  • The global laminate substrate market for IC packages is expected to log a 5 percent CAGR based on square meters of materials processed.
  • Overall leadframe shipments are forecast to see a CAGR of just over 3 percent, with LFCSP (QFN type) registering the strongest unit growth with a CAGR of nearly 7 percent.
  • Encapsulation material revenue will register a CAGR of just under 3 percent, growth driven by rising demand for smaller, thinner packaging form factors.
  • Die attach material revenue will grow at a CAGR of nearly 4 percent.
  • Solder ball revenue will expand at a CAGR of 3 percent.
  • The WLP dielectrics market is expected to increase by, a 9 percent CAGR.
  • The wafer-level plating chemical market is forecasted at a CAGR of over 7 percent.

The Global Semiconductor Packaging Materials Outlook is a comprehensive market research study on the semiconductor packaging materials market conducted by TechSearch International and SEMI or its partner TECHCET LLC. The 2020 outlook is the ninth edition of the report. Interviews were conducted with more than 100 semiconductor manufacturers, packaging subcontractors, fabless semiconductor companies, and packaging material suppliers. The report covers the following semiconductor packaging materials segments: 

  • Substrates
  • Leadframes
  • Bonding wire
  • Encapsulants
  • Underfill materials
  • Die attach
  • Solder balls
  • Wafer-level package dielectrics
  • Wafer-level plating chemicals

For more information and to purchase the report, please visit the SEMI Global Semiconductor Packaging Materials Outlook web page.

About TechSearch International

TechSearch International Inc. was founded in 1987 as a technology licensing and consulting company specializing in emerging semiconductor packaging trends. Multi- and single-client services encompass technology licensing, strategic planning, and market technology analysis. Research topics include flip chip, wafer-level packaging, CSPs, BGAs, system-in-package (SiP), fan-in and FO-WLPs, and semiconductor packaging materials.

About SEMI

SEMI® connects more than 2,400 member companies and 1.3 million professionals worldwide to advance the technology and business of electronics design and manufacturing. SEMI members are responsible for the innovations in materials, design, equipment, software, devices, and services that enable smarter, faster, more powerful, and more affordable electronic products. Electronic System Design Alliance (ESD Alliance), FlexTech, the Fab Owners Alliance (FOA) and the MEMS & Sensors Industry Group (MSIG) are SEMI Technology Communities, defined communities within SEMI focused on specific technologies. Visit www.semi.org to learn more, contact one of our worldwide offices, and connect with SEMI on LinkedIn and Twitter.

Association Contact

Michael Hall/SEMI
Phone: 1.408.943.7988
Email: [email protected]

semi logo

MILPITAS, Calif. — July 27, 2020 — Worldwide silicon wafer area shipments rose 8 percent to 3,152 million square inches in the second quarter of 2020 compared to the 2,920 million square inches shipped in the first quarter of the year and surpassed second quarter 2019 shipments by 6 percent, according to the SEMI Silicon Manufacturers Group (SMG) in its quarterly analysis of the silicon wafer industry.

"While the short-term outlook remains uncertain due to coronavirus and geopolitical challenges impacting the broader industry, global silicon wafer shipments accelerated in the second quarter,”said Neil Weaver, chairman SEMI SMG and vice president, Product Development and Applications Engineering at Shin Etsu Handotai America. “The strong first half of 2020 trended slightly higher than the first half of 2019.”

Silicon Area Shipment Trends – Semiconductor Applications Only

 

Millions of Square Inches

 

1Q 2019

2Q 2019

3Q 2019

4Q 2019

1Q 2020

2Q 2020

Total

3,051

2,983

2,932

2,844

2,920 

3,152

Source: SEMI (www.semi.org), July 2020

All data cited in this release includes polished silicon wafers such as virgin test wafers and epitaxial silicon wafers, as well as non-polished silicon wafers shipped to end users.
Silicon wafers are the fundamental building material for semiconductors, which, in turn, are vital components of virtually all electronics goods, including computers, telecommunications products, and consumer electronics. The highly engineered thin, round disks are produced in various diameters – from one inch to 12 inches – and serve as the substrate material on which most semiconductor devices, or chips, are fabricated.

The SMG is a sub-committee of the SEMI Electronic Materials Group (EMG) and is open to SEMI members involved in manufacturing polycrystalline silicon, monocrystalline silicon or silicon wafers (e.g., as cut, polished, epi). The purpose of the SMG is to facilitate collective efforts on issues related to the silicon industry including the development of market information and statistics about the silicon industry and the semiconductor market.

For more information, please visit SEMI Worldwide Silicon Wafer Shipment Statistics.

About SEMI

SEMI® connects more than 2,400 member companies and 1.3 million professionals worldwide to advance the technology and business of electronics design and manufacturing. SEMI members are responsible for the innovations in materials, design, equipment, software, devices, and services that enable smarter, faster, more powerful, and more affordable electronic products. Electronic System Design Alliance (ESD Alliance), FlexTech, the Fab Owners Alliance (FOA) and the MEMS & Sensors Industry Group (MSIG) are SEMI Strategic Association Partners, defined communities within SEMI focused on specific technologies. Visit www.semi.org to learn more, contact one of our worldwide offices, and connect with SEMI on LinkedIn and Twitter.

Association Contact

Michael Hall/SEMI
Phone: 1.408.943.7988
Email: [email protected]

 

MILPITAS, Calif. — July 23, 2020 — North America-based manufacturers of semiconductor equipment posted $2.32 billion in billings worldwide in June 2020 (three-month average basis), according to the June Equipment Market Data Subscription (EMDS) Billings Report published today by SEMI . The billings figure is 1.1 percent lower than the final May 2020 level of $2.34 billion, and is 14.4 percent higher than the June 2019 billings level of $2.03 billion.

“June billings of North America-based semiconductor equipment manufacturers continue to show signs of resilience as the world copes with new realities posed by COVID-19,” said Ajit Manocha, SEMI president and CEO. “The year-over-year billings increase points to strong fundamentals that are enabling the semiconductor industry to effectively navigate these challenging times.”

The SEMI Billings report uses three-month moving averages of worldwide billings for North American-based semiconductor equipment manufacturers. Billings figures are in millions of U.S. dollars.

  

Billings
(3-mo. avg.)

Year-Over-Year

January 2020

$2,340.2

23.4%

February 2020

$2,374.6

27.1%

March 2020

$2,213.1

21.2%

April 2020

$2,281.3

18.7%

May 2020 (final)

$2,343.3

13.5%

June 2020 (prelim)

$2,317.7

14.4%

Source: SEMI ( www.semi.org ), July 2020

SEMI publishes a monthly North American Billings report and issues the Worldwide Semiconductor Equipment Market Statistics (WWSEMS) report in collaboration with the Semiconductor Equipment Association of Japan (SEAJ). The WWSEMS report currently reports billings by 24 equipment segments and by seven end market regions. SEMI also has a long history of tracking semiconductor industry fab investments in detail on a company-by-company and fab-by-fab basis in its World Fab Forecast and SEMI FabView databases . These powerful tools provide access to spending forecasts, capacity ramp, technology transitions, and other information for over 1,000 fabs worldwide. For an overview of available SEMI market data, please visit www.semi.org/en/MarketInfo .

The data contained in this release were compiled by David Powell, Inc., an independent financial services firm, without audit, from data submitted directly by the participants. SEMI and David Powell, Inc. assume no responsibility for the accuracy of the underlying data.

About SEMI

SEMI® connects more than 2,400 member companies and 1.3 million professionals worldwide to advance the technology and business of electronics design and manufacturing. SEMI members are responsible for the innovations in materials, design, equipment, software, devices, and services that enable smarter, faster, more powerful, and more affordable electronic products. Electronic System Design Alliance (ESD Alliance), FlexTech, the Fab Owners Alliance (FOA) and the MEMS & Sensors Industry Group (MSIG) are SEMI Strategic Association Partners, defined communities within SEMI focused on specific technologies. Visit www.semi.org to learn more, contact one of our worldwide offices, and connect with SEMI on LinkedIn and Twitter.

Association Contact

Michael Hall/SEMI
Phone: 1.408.943.7988
Email: [email protected]

Notes

Next SEMI Billings report is August 20, 2020 at 3:00pm Pacific.

For information on SEAJ Billings Express Report, visit www.seaj.or.jp .

Edwards Vacuum Advanced Fab Robot Wins Best of West Award at Virtual SEMICON West 2020

MILPITAS, Calif. – July 23, 2020 – The Edwards Service Vehicle X (ESV-X) concept automated mobile robot (AMR) – a reimagining of the semiconductor environment that features groundbreaking ground-up lifting and self-loading capabilities – today won the Best of West Award at the Virtual SEMICON West 2020. Edwards Vacuum, maker of the AMR, is a leading developer and manufacturer of sophisticated vacuum products, abatement solutions and related value-added services. See the ESV-X in action in this video.

Presented annually by SEMI and Semiconductor Digest, the Best of West award recognizes innovative new products or services that significantly advance the electronics manufacturing supply chain or a particular manufacturing capability. The ESV-X loads equipment without human intervention and autonomously delivers it to work locations within a semiconductor factory to minimize scheduled and unplanned downtime and the need for other transportation equipment while increasing customer safety. The ESV-X also frees technicians to focus on more strategic work.

Featuring state-of-the-art autonomous motion technology, the ESV-X uses mapping and localization to navigate semiconductor environments. Omni-directional movement and real-time rerouting allow the ESV-X to maneuver through dynamic and confined environments in ways never before possible with automated materials handlers. What’s more, onboard safety systems keep nearby chip manufacturing staff at a safe distance without interfering in their work.

“There’s a big emphasis on innovation at this year’s SEMICON West,” said Pete Singer, Editor-in-Chief of Semiconductor Digest. “The Edwards ESV-X is a great example of a supplier looking at new ways to improve factory efficiency and safety while saving time and money.”

About Semiconductor Digest
Through a mix of news, contributed articles and staff-written articles, Semiconductor Digest is dedicated to providing global information about the design, manufacturing, packaging and testing of semiconductors and other types of electronic devices, including MEMs, LEDs, displays, power electronics, optoelectronics/photonics, biomedical devices, solar cells, thin film batteries and flexible electronics. Semiconductor Digest consists of a website, magazine and topic-focused newsletters.

About SEMI

SEMI® connects more than 2,400 member companies and 1.3 million professionals worldwide to advance the technology and business of electronics design and manufacturing. SEMI members are responsible for the innovations in materials, design, equipment, software, devices, and services that enable smarter, faster, more powerful, and more affordable electronic products. Electronic System Design Alliance (ESD Alliance), FlexTech, the Fab Owners Alliance (FOA) and the MEMS & Sensors Industry Group (MSIG) are SEMI Technology Communities, defined communities within SEMI focused on specific technologies. Visit www.semi.org to learn more, contact one of our worldwide offices, and connect with SEMI on LinkedIn and Twitter.

Association contact

Scott Stevens, Cardinal Communications for SEMI Americas
Phone: 1.512.288.4050
Email: [email protected]

Semiconductor Digest contact

Pete Singer, Editor-in-Chief
Phone: 1.978.470.1806
Email: [email protected]

SEMI President and CEO Ajit Manocha has voiced his support for amendments the United States House of Representatives and Senate included in the Fiscal Year 2021 National Defense Authorization Act (NDAA) that would authorize important programs to support semiconductor manufacturing and research in the U.S.“SEMI is very pleased the House and Senate included in the NDAA provisions to support semiconductor manufacturing and research in the United States,” Manocha said. “The U.S. has not kept pace with the growth of semiconductor manufacturing abroad. The U.S. share of global semiconductor manufacturing capacity has been cut in half to just 12 percent over the past 20 years and is forecast to fall to 10 percent by 2023. We applaud the sponsors for their support, leadership and hard work to win House and Senate approval to increase federal government support for the industry. However, this is just the start of what needs to be done to reverse this 20-year decline. The CHIPS for America Act’s investment tax credit for new and expanded semiconductor manufacturing facilities is essential to provide a robust, transparent and reliable federal incentive that will be the foundation of renewed growth of U.S. fabs.”In addition to authorizing a new grant program, the House and Senate amendments would direct the Defense Department to create programs with the private sector to: Direct the Defense Department to create programs with the private sector to encourage the development of advanced, measurably secure microelectronics, Establish a Multilateral Microelectronics Security Fund the U.S., its allies and partners will use to reach agreements promoting consistency in their policies related to microelectronics, Direct the President to establish a subcommittee on semiconductor technology and innovation within the National Science and Technology Council, and Direct the Secretary of Commerce to establish a national semiconductor technology center and other important new programs. The House amendment would authorize an additional $1.2 billion for semiconductor research. Both the House and Senate are expected to complete debate and pass the NDAA bills this week.SEMI members operate semiconductor supply chain facilities across the U.S. Of the 25 states with at least one major facility, 18 boast large semiconductor manufacturing fabs and other facilities while seven offer semiconductor equipment and materials production. Operating for decades, many of these facilities are key pillars of local economies and underpin hundreds of small businesses that supply components and materials. The U.S. semiconductor supply chain accounts for about 240,000 high-skill and high-wage jobs nationwide.Joe Pasetti is Vice President of Global Public Policy and Advocacy at SEMI.
Read More

Critical Role of 1,025 Standards and Emerging Cybersecurity Developments Showcased at SEMICON West

MILPITAS, Calif. – July 21, 2020​ – Focusing in on how the microelectronics industry has proved capable of proceeding apace during the COVID-19 pandemic, SEMI today highlighted the role of industry standards and emerging developments around cybersecurity at the annual West Views Media Conference at SEMICON West 2020.

Broad adoption of uniform SEMI standards is providing the foundation for factory automation and is making it possible for thousands of tech staff to keep working through shutdowns – and whatever happens next – should another pandemic hit. James Amano, senior director of International Standards for SEMI, shared lessons gleaned during the pandemic and announced candidate standards proposed for approval and release in the coming months.

Virtual West Banner

“The pandemic has put a spotlight on the fact that a lot of chipmaker suppliers can use tablets and virtual reality headsets or goggles to do work that once required traveling engineers,” Amano said. “Thanks to SEMI and committees comprised of more than 5,000 Standards volunteers, there is no hodgepodge of differing remote connectivity solutions across different platforms, nor the accompanying accidental cybersecurity threats.”

Amano indicated that invaluable preparation has become readily apparent during the past few months, when fab operations hummed along despite COVID-19. For example, between February and April 2020, the use of software for remote diagnosis and management of semiconductor manufacturing tools by semiconductor suppliers more than doubled, and usage remained at record-high levels in May and June. He said that with the groundwork established by standards, a lot of technicians have continued to handle vital diagnostics and control, but from home.

Dave Anderson, SEMI Americas president and host organizer for SEMICON West, noted the opportunity to share learning on standards between industries.

“Automobiles now contain hundreds of microchips, so carmakers are big proponents and users of industry standards,” Anderson observed. “The global auto industry can teach other businesses new lessons about how standards can strengthen and advance industries. And at the same time, the auto industry can learn more about machine interface and data communications standards from the semiconductor industry.”

Meanwhile, chipmakers welcome technology that limits people within their cleanrooms.

“You want to minimize how often people come close to wafers, much less touch them – especially at leading-edge fabs where semiconductor recipe changes can occur every few months,” Anderson said.

Anderson also predicts the COVID-19 crisis will accelerate widespread interest in standards.

What’s next for cybersecurity and standards

Among takeaways surfaced during the pandemic is the need for accelerated development of standards with ever-more comprehensive cybersecurity specifications. In an increasingly competitive world, such standards will help to sustain uninterrupted progress during a next crisis, including another quarantine. Underscored by the pandemic, two draft SEMI standards are underway.

  • Intel and Cimetrix are leading SEMI Draft Document 6566, Specification for Malware-Free Equipment Integration, refining it to define protocols for pre-shipment scans of equipment as well as various types of ongoing support including file transfers, maintenance patches, and component replacement. Importantly, the team’s aim is for the desired standard to introduce steps to “harden” equipment software and make it less vulnerable to cyberattacks. The measures will be evaluated against third-party frameworks, such as the National Vulnerability Database (NVD) and Common Vulnerability Scoring System (CVSS).
  • TSMC and Industrial Technology Research Institute (ITRI) are leading SEMI Draft Document 6506, Specification for Cybersecurity of Fab Equipment, which defines a common, minimum set of security requirements for fab equipment. The standard will provide a baseline focusing on four major components of fab equipment: operating systems, network security, endpoint protection, and security monitoring. Once approved by the global SEMI Information and Control Committee, the goal will be to scale requirements as malware threats evolve.

About SEMI

SEMI® connects more than 2,400 member companies and 1.3 million professionals worldwide to advance the technology and business of electronics design and manufacturing. SEMI members are responsible for the innovations in materials, design, equipment, software, devices, and services that enable smarter, faster, more powerful, and more affordable electronic products. Electronic System Design Alliance (ESD Alliance), FlexTech, the Fab Owners Alliance (FOA) and the MEMS & Sensors Industry Group (MSIG) are SEMI Technology Communities, defined groups within SEMI focused on specific technologies. Visit www.semi.org to learn more, contact one of our worldwide offices, and connect with SEMI on LinkedIn and Twitter.

Association Contact

Scott Stevens, Cardinal Communications for SEMI Americas
Phone: 1.512.288.4050
Email: ​[email protected]

MILPITAS, Calif. – July 20, 2020 – SEMI and Semiconductor Digest today announced finalists for the Best of West award to be presented at the virtual SEMICON West 2020. Presented annually, the Best of West award recognizes innovative new products or services that significantly advance the electronics manufacturing supply chain or a particular manufacturing capability.

Virtual West Banner


The following Best of West 2020 finalists will showcase their judged products in their booths at SEMICON West 2020, being held virtually this year for the first time:

Advanced Energy: eVoS™LE
A unigue technology that enables tightly targeted ion energy control, essential for precise processing of advanced etch and deposition applications used to create leading-edge device features at 5nm and below. Providing an alternative to conventional sinusoidal RF bias plasma power, that uses complex multi-frequency systems, eVoS produces customized narrow ion energy distributions in a singular solution.

Edwards Vaccum: ESV-X
The ESV-X automated mobile robot (AMR) is a future-focused product that utilizes inventive lifting and transport mechanisms to create a safe and efficient operating environment and is the first step toward the future vision of an automated sub-fab. Edwards’ versatile payload delivery platform lays the foundation for an interconnected sub-fab maintenance system that can be expanded upon to include field service assistance and smart storage.

Flexciton: Wafer Fab Scheduling Software
The scheduling software provides near-optimal fab plans with fast solution times and seeks to bridge the gap between heuristic and pure-optimization approaches. A hybrid-optimization model based on mixed-integer linear programming (MILP) employs advanced exact and approximate decomposition techniques and is able to significantly reduce the problem complexity, yet retain near-optimality.

SPTS Technologies Limited: Ascent™
This end-point detection technology is a novel method to monitor the progress of a SiC via etch to a GaN base layer. Launched earlier this year, it has been well received by the leading RF device manufacturers looking to implement process control, increase throughput, and maximize yields in volume production.

The Best of West award-winner will be announced during SEMICON West on Thursday, July 23, 2020. Learn more at www.semiconwest.org.

About Semiconductor Digest
Through a mix of news, contributed articles and staff-written articles, Semiconductor Digest (www.semiconductor-digest.com), is dedicated to providing global information about the design, manufacturing, packaging and testing of semiconductors and other types of electronic devices, including MEMs, LEDs, displays, power electronics, optoelectronics/photonics, biomedical devices, solar cells, thin film batteries and flexible electronics. Semiconductor Digest consists of a website, magazine and topic-focused newsletters.

About SEMI
SEMI® connects more than 2,400 member companies and 1.3 million professionals worldwide to advance the technology and business of electronics design and manufacturing. SEMI members are responsible for the innovations in materials, design, equipment, software, devices, and services that enable smarter, faster, more powerful, and more affordable electronic products. Electronic System Design Alliance (ESD Alliance), FlexTech, the Fab Owners Alliance (FOA) and the MEMS & Sensors Industry Group (MSIG) are SEMI Technology Communities, defined communities within SEMI focused on specific technologies. Visit www.semi.org to learn more, contact one of our worldwide offices, and connect with SEMI on LinkedIn and Twitter.
###

Association contact
Scott Stevens, Cardinal Communications for SEMI Americas
Phone: 1.512.288.4050
Email: [email protected]

Semiconductor Digest contact
Pete Singer, Editor-in-Chief
Phone: 1.978.470.1806
Email: [email protected]