200mm Equipment Market

200mm Equipment Market Gaining New Lease on Life — Supporting Growth in Emerging Technologies

By Mike Rosa, Applied Materials

In 2004/2005, shipments of 300mm wafer fab equipment (WFE) began to outpace that of 200mm platforms.  As the “baton” in the node-scaling race appeared to pass from 200mm to 300mm, it was clear that device manufacturers were transitioning to higher-volume, more cost-effective 300mm toolsets for cost efficiencies of the production of advanced memory and microprocessor devices.  Tool suppliers enabled the transition with the availability of the comprehensive 300mm toolset and began a new 300mm technology race, and leaving the major OEMs to focus on service and spares for the now legacy 200mm toolsets.  With advanced device designs fully transitioned to 300mm, many IDMs and foundries were left with growing excess capacity on their 200mm production lines. 

Surprisingly, new life and attention has been refocused on the 200mm tool sets and available capacity as two phenomena are driving new requirement and economics.

First, in 2006, a MEMS (Micro-Electro-Mechanical Systems)-based accelerometer became a game changer when introduced into Nintendo’s next-generation Wii motion controller.  This was the first significant and novel use of a MEMS device for motion tracking in a high-volume consumer application.  Next, in 2007, when Apple Inc. first introduced the iPhone™ to the world, it came to light that MEMS devices were enabling a number of its advanced motion-based features. 

Later, it would be noted that more than 75% of the semiconductor device content in the iPhone was sourced from 200mm wafer starts.  The devices manufactured on 200mm wafers spanned a wide variety of applications that included not only MEMS applications (motion, audio, RF, etc.) but also CIS (CMOS Image Sensor), communications, power management and analog devices.

Sold in the hundreds of millions per year, first the iPhone and then the multitude of other smart phones, tablet PCs, and related digital devices, that followed, drove the adoption of the emerging “More-than-Moore” class of devices (which were first pioneered  on 150mm wafers at the time) onto 200mm wafers.  These high-volume consumer applications gave rise to a resurgence in both new and used of 200mm equipment. This sudden requirement for new sourcing of “legacy” 200mm toolsets placed considerable strain on a supply  chain that then focused almost exclusively on 300mm; tool vendors struggled in  refurbishment, upgrade, and production of matching tools and processes that performed outside the requirements of traditional semiconductor applications (see Figure 1). 

Figure 1.  MEMS are considered one of the “More-than-Moore” class of emerging technology devices whose diversity presents considerable challenge in process and materials capability to
both device manufacturers and 200mm OEM 
providers alike.  A challenge brought about by each device seemingly requiring its own unique enabling fabrication process or material.

Some of these additional requirements — including new and thicker films (>20µm), advanced DRIE (Deep-Reactive-Ion-Etch) capabilities capable of delivering aspect ratios approaching 100:1, and new process capabilities like HFv (Hydrofluoric Acid vapor) release etch and Wafer Bonding — resulted in OEMs needing to restart 200mm tool development.  In some cases, OEMS needed to expand their product portfolios to support the growing needs of customers producing devices in the rapidly expanding “More-than-Moore” device segment.

Fast forward to 2014 —what a difference approximately seven years has made to the industry segment and more specifically the number of opportunities in the 200mm WFE market for the new class of devices.  

The surge in mobile device applications and more recently wearable technologies, has meant that device manufacturers are increasingly under  pressure to produce cheaper, smaller, more capable and more power efficient devices most economically and efficiently — and this remains optimally on legacy 200mm toolsets.  Combining this with the materials and production challenges presented by ultra-high volume applications spelled out in the ‘Trillion Sensor Vision’ and the now looming IoT (Internet-of-Things) (see Figure 2), and it becomes clear that OEMs who continue to support and develop solutions for the 200mm WFE market  have both significant challenges and potential rewards.

Figure 2.  The IoT (Internet-of-Things) by most accounts prescribes device volumes as high as 1 Trillion (per year!) by 2024.  These device volumes are accompanied by severe reductions in ASP.  
Maintaining expanded device functionality, a reduced device size and a further reduced cost of fabrication, presents considerable challenge to both device producers and tool OEMs alike.

Rising to the challenge presented by the demands of these rapidly growing market segments, Applied Materials is an OEM that has, over the past several years, continued to invest in the R&D of its 200mm portfolio products.  Challenged to deliver new materials and processes (see Figure 3) in support the growing class of 200mm emerging technology applications that have come to include MEMS, CIS, Power Device, Analog, WLP (Wafer Level Packaging), TFB (Thin Film Battery), TSV (through-silicon via), etc., Applied Materials believes that working close to the customer and more collaboratively throughout the supply chain is paramount to success in a technically challenging and price sensitive market. The 200mm ecosystem supporting broadly expanding cost-senstive device classes represent a new fork in the roadmap that has been almost myopically focused on Moore’s Law evolution.

Figure 3.  Leveraging its core capabilities in precision materials engineering, Applied Materials is able to deliver substantially re-engineered 200mm toolsets to
produce advanced
materials and processes needed to support the next generation of “More-than-Moore” devices. Source: Applied Materials

Learn more about how this dynamic market is changing at the session on “Secondary Equipment for Mobile & Diversified Applications” at SEMICON West 2014 in San Francisco, Calif on July 8-10.

Other upcoming SEMI expositions include: SEMICON Taiwan 2014 (September 3-5), SEMICON Europa 2014 (October 7-9) and SEMICON Japan 2014 (December 3-5).

Originally published in Solid State Technology.

June 30, 2014